{"title":"GSM Dialers","description":"","products":[{"product_id":"mobilarm-micro","title":"MobilArm-Micro","description":"\u003cp align=\"justify\"\u003eThe \u003cstrong\u003eMobilArm-Micro\u003c\/strong\u003e is a GSM dialer module developed for remote signaling and remote switching of security alarm systems. Its input is activated by a potential-free contact, and it has a single-circuit low-current relay output. It can be programmed and downloaded from a laptop or desktop computer using its own software. The module notifies the user of changes in the inputs via a pre-programmed SMS with user-defined content. Additionally, the state of the relay output can be changed with an SMS (with user-programmed content) or a free ring based on \u003cstrong\u003ecaller ID recognition\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe GSM pager recommended for family use can be programmed for a maximum of \u003cstrong\u003e4 phone numbers\u003c\/strong\u003e, so one SMS can be sent to a maximum of \u003cstrong\u003e4 phones\u003c\/strong\u003e. It is designed for private use, providing reliable yet affordable GSM remote signaling and remote control, suitable for home use as well as an auxiliary security signaling and remote operating device. Its power supply is \u003cstrong\u003e10-15V\u003c\/strong\u003e DC, with a minimum load capacity of \u003cstrong\u003e500mA\u003c\/strong\u003e. It is recommended to operate it in a protected location, within the alarm panel's enclosure, powered by its battery.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe digital \u003cstrong\u003einput\u003c\/strong\u003e of the \u003cstrong\u003eMobilArm-Micro\u003c\/strong\u003e GSM dialer can be \u003cstrong\u003enamed\u003c\/strong\u003e with a maximum of 32 characters. Similarly, the user can define the commands for switching the outputs on and off. The type of relay output can be freely changed; it can be \u003cstrong\u003emonostable\u003c\/strong\u003e (automatically switches off after a defined period of time after activation) or \u003cstrong\u003ebistable\u003c\/strong\u003e (switching on and off must be done with separate commands).\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe GSM module has its own name and identifier, for supervising a larger number of modules simultaneously and for easier identification of events. The module has an internal timer, so in monostable mode, when activated by a call, the output can be switched on for a maximum duration of \u003cstrong\u003e100 hours\u003c\/strong\u003e. The relay automatically switches off or returns to its original state after the specified period. For each valid phone number, it can be specified which phone should receive an SMS notification for an alarm triggered by the input. The modules are available in two versions: with a built-in dual-band antenna, or with an external screw-on magnetic base antenna with an \u003cstrong\u003eSMA\u003c\/strong\u003e connector mounted on a \u003cstrong\u003e60cm RG-174\u003c\/strong\u003e coaxial cable.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe \u003cstrong\u003eMobilArm-Micro\u003c\/strong\u003e GSM alarm module works with a service provider-independent industrial GSM module and a subscription or prepaid \u003cstrong\u003enanoSIM\u003c\/strong\u003e card without a PIN code. The \u003cstrong\u003eMobilArm-Micro\u003c\/strong\u003e security signaling modules are the simplified and smallest members of the \u003cstrong\u003eMobilArm \/ MobilSwitch\u003c\/strong\u003e device family, whose more complex type is the \u003cstrong\u003eMobilSwitch\u003c\/strong\u003e, which has more relay outputs or high-current relay outputs, and more digital inputs. The \u003cstrong\u003eMobilArm-Micro\u003c\/strong\u003e is available in a gray box with a built-in antenna, and the \u003cstrong\u003eMobilArm-Micro-a\u003c\/strong\u003e in a black box with an external magnetic base antenna. The antenna and our download software are included with all devices. The antenna can be found in the device box at the time of purchase, and the free universal download software called \u003cstrong\u003eUnified\u003c\/strong\u003e is available for free download from the seasoft.hu\/downloads menu item.\u003c\/p\u003e","brand":"Solar-Soft","offers":[{"title":"Belső bot","offer_id":49997958873430,"sku":"MobilArm-Micro","price":24117.0,"currency_code":"HUF","in_stock":true},{"title":"Mágnestalpas","offer_id":49997958906198,"sku":"MobilArm-Micro-a","price":25387.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/1835\/0678\/files\/MobilArm-Micro.jpg?v=1751274050"},{"product_id":"mobilarm-nano","title":"MobilArm-Nano","description":"\u003cp align=\"justify\"\u003eThe \u003cstrong\u003eMobilArm-Nano\u003c\/strong\u003e is a GSM dialer module developed for remote signaling and remote switching of security alarm control panels, and is a more modern successor to the \u003cstrong\u003eMobilArm-1\u003c\/strong\u003e GSM dialer. Its input is activated by a voltage-free contact, and it has a simple transistor output. It can be programmed, downloaded, and read out from a laptop or desktop computer using its own software. The module notifies the user of input changes via an SMS pre-programmed with content of the user's choice.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eIn addition, the state of the transistor output can be changed with an SMS (with user-programmed content), or by a free ring based on \u003cstrong\u003ecaller ID recognition\u003c\/strong\u003e. The GSM pager, recommended for family use, can be programmed for a maximum of \u003cstrong\u003e4 phone numbers\u003c\/strong\u003e, so one SMS can be sent to a maximum of \u003cstrong\u003e4 phones\u003c\/strong\u003e. It is a reliable, good value-for-money GSM remote signaling and remote control unit designed for private use, suitable for home use and as an auxiliary security signaling and remote operating device. Its power supply is \u003cstrong\u003e10-15V\u003c\/strong\u003e DC, with a minimum load capacity of \u003cstrong\u003e500mA\u003c\/strong\u003e. It is recommended to operate it from an alarm control panel battery.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe digital \u003cstrong\u003einput\u003c\/strong\u003e and transistor output of the GSM dialer can be \u003cstrong\u003enamed\u003c\/strong\u003e with a maximum of 32 characters. Similarly, the commands that switch the outputs on and off can also be defined by the user. The type of output can be freely changed, it can be \u003cstrong\u003emonostable\u003c\/strong\u003e (automatically switches off after a defined period of time after switching on) or \u003cstrong\u003ebistable\u003c\/strong\u003e (switching on and off must be done with separate commands). The GSM module has its own name for simultaneous monitoring of a larger number of modules, and for easier identification of events.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe module has an internal timer, so in monostable mode, when the output is started by a call, it can be switched on for a maximum duration of \u003cstrong\u003e100 hours\u003c\/strong\u003e. After the call, the output automatically switches off after the specified time and returns to its original state. For every valid phone number, it can be specified which phone should receive an \u003cstrong\u003eSMS\u003c\/strong\u003e notification of an alarm triggered by the input. The modules are available in two versions: with a built-in dual-band antenna, or with an external screw-on magnetic base antenna with an \u003cstrong\u003eSMA\u003c\/strong\u003e connector mounted on a \u003cstrong\u003e60cm RG-174\u003c\/strong\u003e coaxial cable.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe \u003cstrong\u003eMobilArm-Nano\u003c\/strong\u003e GSM alarm module works with a carrier-independent industrial GSM module, and a subscription or prepaid \u003cstrong\u003enanoSIM\u003c\/strong\u003e card without a PIN code. The \u003cstrong\u003eMobilArm-Nano\u003c\/strong\u003e security signaling modules are the simplified and smallest members of the \u003cstrong\u003eMobilArm\u003c\/strong\u003e device family. More complex types include the \u003cstrong\u003eMobilArm-Micro\u003c\/strong\u003e and the industrial \u003cstrong\u003eMobilSwitch\u003c\/strong\u003e series, which have multiple relay outputs or high-current relay outputs, and more digital inputs. The \u003cstrong\u003eMobilArm-Nano\u003c\/strong\u003e is available in a gray box with a built-in antenna, and the \u003cstrong\u003eMobilArm-Nano-a\u003c\/strong\u003e is available in a black box with an external magnetic base antenna. The antenna and our download software are included with every device. The antenna is included in the device box at the time of purchase, and the universal download software called \u003cstrong\u003eUnified\u003c\/strong\u003e is available under the \u003cstrong\u003e\u003ca href=\"https:\/\/solar-soft.hu\/letoltesek\"\u003esolar-soft.hu\/letöltések\u003c\/a\u003e\u003c\/strong\u003e menu item.\u003c\/p\u003e","brand":"Solar-Soft","offers":[{"title":"Belső bot","offer_id":49998301364566,"sku":"MobilArm-Nano","price":22847.0,"currency_code":"HUF","in_stock":true},{"title":"Mágnestalpas","offer_id":49998301397334,"sku":"MobilArm-Nano-a","price":24117.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/1835\/0678\/files\/MobilArm-Nano.jpg?v=1751273935"},{"product_id":"mobilcom-6","title":"MobilCom-6","description":"\u003cp align=\"justify\"\u003eThe \u003cstrong\u003eMobilCom-6\u003c\/strong\u003e is a lower consumption, more modern successor to the \u003cstrong\u003eMobilCom-655\u003c\/strong\u003e, a GSM communicator and transmitter, or a GSM dialer and line replacement module, a \u003cstrong\u003eGSM adapter\u003c\/strong\u003e that can be connected to an alarm control panel. It is suitable for replacing \u003cstrong\u003eDTMF Contact-ID\u003c\/strong\u003e telephone line communication with a similar, but GSM-based communication. The GSM transmitter and dialer adapter has been specifically developed for alarm control panels and fire alarm control panels, and accordingly, special bandwidth and functions have been developed that require \u003cstrong\u003eDTMF-based data transmission\u003c\/strong\u003e. The GSM dialer operates with a built-in industrial GSM module and any subscription or pre-paid card.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe GSM communicator only passes through \u003cstrong\u003eDTMF Contact ID\u003c\/strong\u003e-based communication; it does not store or convert it. Apart from the \u003cstrong\u003e12-15V\u003c\/strong\u003e supply voltage, the GSM dialer adapter only connects to the alarm device's telephone line input. It also has a separate SMS input, which, when activated, can send a separate SMS to a mobile phone number. The GSM dialer monitors the alarm control panel's output, line voltage, and provides a dial tone during pickup. It also controls the GSM module, queries it, and periodically re-registers it to the network.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe GSM transmitter has two inputs: a two-point power input requiring \u003cstrong\u003e12-15V\u003c\/strong\u003e, a two-point terminal block, and a screw-on \u003cstrong\u003eSMA\u003c\/strong\u003e antenna input for the industrial modem. The adapter has been specifically developed for alarm control panels and fire alarms, and therefore, special bandwidth and functions required for \u003cstrong\u003eDTMF-based data transmission\u003c\/strong\u003e have been implemented. For this reason, the GSM dialer and line replacement or GSM transmitter is primarily designed for one-way communication, so even if it receives a call from outside, the system does not signal the incoming call due to the lack of ringing voltage. Every SMS received by the \u003cstrong\u003eMobilCom-6\u003c\/strong\u003e GSM dialer is forwarded to the mobile number specified by the user, including, for example, the service provider's SMS indicating the balance of the top-up card. The various SMS signaling and forwarding functions can be programmed for the module by sending a few \u003cstrong\u003eSMS\u003c\/strong\u003e messages.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe \u003cstrong\u003eGSM line replacement\u003c\/strong\u003e or \u003cstrong\u003eGSM adapter\u003c\/strong\u003e can only be installed in an alarm control panel and is available as a standalone GSM transmitter panel, primarily intended for transmitting \u003cstrong\u003eDTMF Contact ID\u003c\/strong\u003e-based communications. The transmission of other communication formats (e.g., pulse) heavily depends on environmental parameters. The \u003cstrong\u003eMobilCom-6\u003c\/strong\u003e GSM line replacement is available in a simple and inexpensive panel or boxed version, equipped with a small built-in GSM antenna, or an external dual-band whip antenna mounted on a \u003cstrong\u003e0.5m\u003c\/strong\u003e coaxial cable, and a service provider-independent industrial GSM module.\u003c\/p\u003e","brand":"Solar-Soft","offers":[{"title":"Mágnestalpas","offer_id":49998324564310,"sku":"MobilCom-6-a","price":27292.0,"currency_code":"HUF","in_stock":true},{"title":"SMA csavaros bot","offer_id":49998324597078,"sku":"MobilCom-6","price":26022.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/1835\/0678\/files\/images.jpg?v=1773827463"},{"product_id":"mobilcom-8","title":"MobilCom-8","description":"\u003cp align=\"justify\"\u003eThe\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eMobilCom-8\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efamily is a series of GSM transmission modules that, when connected to the telephone line output of alarm or fire alarm control panels, translate the panels'\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eContactID\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ereports into\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003etext messages\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand send them via\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eSMS\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto up to\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eusers' mobile phones. During normal operation, the module receives and acknowledges the\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eContactID\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emessages from the alarm control panel, converts them into text messages, and then forwards the first 2 messages delivered within a single communication as SMS to the user(s)' phone(s) according to the configuration.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe device can be extensively configured via the\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003emicroUSB\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eport of laptops and computers using the free\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eUnified\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003euniversal downloader software written by\u003cem\u003e\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/solar-soft.hu\/letoltesek\"\u003eSeaSoft Kft.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eThe module is specifically designed to fit into control panel enclosures, connecting to their\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e12V\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ebattery and telephone line output. It operates with a carrier-independent GSM module that requires a prepaid or contract\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003enanoSIM\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecard.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eMobilCom-8 ContactID\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003econverter module also has a voltage-free contact input that can be used to send SMS messages with freely configurable content for any purpose. Our free\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eUnified\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003euniversal downloader software allows our devices to be programmed under\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eWindows-XP\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWindows-7\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWindows-8\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003eand\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eWindows-10\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eoperating systems. Neither a driver nor the\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eUnified\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esoftware needs to be separately installed to program the devices; the downloader software can be run immediately. Since our software can also program other devices, it can only be used with one of our modules connected via a\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eUSB\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eport and automatically recognized by it. The content of every memory location of the device can also be changed by sending\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eSMS\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emessages from a dedicated phone number, using the memory table.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eMobilCom-8 CiD\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ebased GSM transmission module forwards SMS messages received from the carrier or from unknown numbers to the phone number(s) specified in the configuration, including the balance sent by the carrier if a prepaid card is used. The panel features a multi-color (red-green-yellow) LED for displaying the device's status and a red\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eLED\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003esignal strength indication\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand other\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003estatus functions\u003c\/strong\u003e. The module is available in three versions:\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eMobilCom-8p\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eas a panel-only version with an external magnetic antenna,\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eMobilCom-8\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein an enclosed version with an internal built-in antenna in a light-colored plastic box, and\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eMobilCom-8a\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ein a black plastic box with an external magnetic antenna and an\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eSMA\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003econnector. In all cases, it comes with a\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003emicroSIM\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eslot and a\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003ecarrier-unlocked\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(carrier-independent) GSM module.\u003c\/p\u003e","brand":"Solar-Soft","offers":[{"title":"SMA csavaros bot","offer_id":49998356021590,"sku":"MobilCom-8","price":26657.0,"currency_code":"HUF","in_stock":true},{"title":"Mágnestalpas","offer_id":49998356054358,"sku":"MobilCom-8-a","price":27927.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/1835\/0678\/files\/MobilCom__8__16.webp?v=1741464548"}],"url":"https:\/\/solar-soft.hu\/en\/collections\/gsm-atjelzok.oembed","provider":"Solar-Soft.hu","version":"1.0","type":"link"}