MobileFlood-Micro
2-input low/high level indicator and alarm. Two-channel low/high water level indicator and alarm module, with gold-plated water level sensor probe, 2m cable and built-in antenna.
Our devices operate most stably on the One network.
Couldn't load pickup availability
Terméktípus |
Industrial Tools and GSM Dialers
|
|---|---|
Ár |
29.832 Ft |
Értékelés |
|
Terméktípus |
Industrial Tools and GSM Dialers
|
Értékelés |
|
Méretek A szerelődoboz külső méretei. H*SZ*M
A külső antennával szerelt eszközök esetében a méret az antennával együtt van megadva
|
|
Antenna típusa |
|
Programozás |
USB and Unified prg
|
Tárolható telefonszámok |
|
Riasztási módok |
SMS and Call
|
Éltejel Vizuális "LED" visszajelzés az eszköz állapotáról, működéséről.
|
|
Product description
The MobilFlood-Micro GSM module is a special module specifically developed for cellars, basements, underground garages, wells, water shafts, swimming pools, tanks, and overflows for the purpose of indicating and alarming low water levels, high water levels, water ingress, and elevated groundwater. It is suitable for indicating the appearance or level change of rainwater, thermal water, groundwater, and other standing waters. It has 2 probe inputs which, when immersed in water or when the immersion ceases, initiate SMS sending and/or voice calls. It operates with a configuration and phone numbers programmed by the user via a computer's USB port. The MobilFlood-Micro GSM can be programmed for up to 4 mobile numbers according to the program downloaded into the module. The GSM module is operator-independent and operates with a prepaid or subscription nanoSIM card. It also has an optional acknowledgment function, which can be acknowledged by calling it back.
The MobilFlood-Micro plastic box with mounting tabs features red-yellow-green LED diodes for status and signal strength indication. It is only available in a boxed version. It comes with a probe with a 3-pin white connector on an approx. 2m long coaxial cable and a pre-mounted internal or magnetic base external antenna. Its power supply is 10-30V DC, with a minimum load capacity of 500mA. It is recommended to run it from a fixed 12V, 500mA or 1A wall plug power supply. SMS messages from the service provider are forwarded to the specified phone number according to the settings, and its operation can be continuously monitored with a configured heartbeat sending function. The module is available in two versions: with a built-in dual-band antenna, and with an RG-174 SMA connector magnetic base antenna. The two probe inputs allow for the indication of 2 separate levels. If the water level reaches the probe, or if the level drops below the probe's level, the alarm starts, and SMS sending and/or ringing begins based on the actions assigned to the phone numbers.
The boxed version with an independent GSM module and built-in antenna is available under the name MobilFlood-Micro, while the version with an external magnetic base antenna is available under the name MobilFlood-Micro-a. Its free download software and the module description can be downloaded from our website solar-soft.hu/letoltesek. Our modules can be configured from a computer via a microUSB connector under Windows 7 (or newer) operating system. The MobilFlood-Micro is an operator-independent industrial GSM module, suitable for both voice calls and SMS sending, and works with both subscription and prepaid nanoSIM cards.
Comparison Chart
| Alapadatok | |
|---|---|
Terméktípus | Industrial Tools and GSM Dialers
Industrial Tools and GSM Dialers
|
Ár | 29.832 Ft 31.102 Ft |
Értékelés | |
| Technikai paraméterek | |
Terméktípus | Industrial Tools and GSM Dialers
Industrial Tools and GSM Dialers
|
Értékelés | |
Méretek A szerelődoboz külső méretei. H*SZ*M
A külső antennával szerelt eszközök esetében a méret az antennával együtt van megadva
| |
Antenna típusa | |
| Kommunikáció és Programozás | |
Programozás | USB and Unified prg
USB and Unified prg
|
Tárolható telefonszámok | |
| Funkciók | |
Riasztási módok | SMS and Call
SMS and Call
|
Éltejel Vizuális "LED" visszajelzés az eszköz állapotáról, működéséről.
| |

