MobilPhase-Nano-c

The front of the lower panel of the MobilPhaseNano-C module houses the terminal block prepared for network connection, allowing for the connection of phase and neutral conductors. On the rear side of the lower panel, there is a high-current relay output terminal block with an NO-COM-NC configuration, capable of handling up to 8A at 230V. This allows for direct remote control of smaller network consumers and other devices using the relay output. The upper panel of the MobilPhase-Nano-C power outage alarm features a nanoSIM slot, a microUSB connector for computer programming of the module, the red jumper for the internal lithium-polymer battery (on newer types, a switch on the side), and the phase test button. The module connects to the mains phase via a fuse and a low-power safety isolation transformer with a low-voltage output, thus galvanically isolating the rest of the module from the mains. The lower and upper panels of the MobilPhase-Nano-C are connected by ribbon cables that can only be plugged in in one position.

The MobilPhase-Nano-C power outage indicator module's upper panel has a fixed, built-in SMA antenna connector on the side. A small right-angle whip antenna can be screwed onto it, or, if placed in a metal cabinet, an external magnetic base antenna via an approximately 1m long RG-174 coaxial cable. The connector for the built-in Li-Po battery is located on the upper panel. On the front panel, a button can be used to simulate a power outage, allowing the alert to be tested. When pressed, the module generates alarm messages and/or calls according to the programming. At the bottom of the front panel, a red LED labeled "Error" indicates the network status. At the top, a blue LED shows the status of the high-current relay output, and in the middle, a two-color LED provides information about the module's operation. The lower and upper halves of the module are connected by a detachable ribbon cable. The power outage indicator and power outage alarm device is housed in a standard-sized "C" – or "DIN" rail plastic enclosure, ensuring easy installation.

The MobilPhase-Nano-C can also be programmed and downloaded using our free “Unified” download software via the module's micro-USB port. When the powered device is connected to a USB port, the free “Unified” download software running on Windows XP, Windows-7, Windows-8, or Windows-10 operating systems automatically recognizes the device. The software recognizes and manages the entire MobilSwitch / MobilArm / MobilGate / MobilTherm / Mobilcar and MobilPhase family. When the device is connected, the software searches for and identifies the module type, and its image appears on the software monitor. The status of the GSM module connected to the network, the status of the network and inputs, GSM signal strength, etc., can be queried from the software by clicking on "Query Status". User settings should be configured by filling in the memory locations with professionally understandable data. It is recommended to only overwrite the factory default values of certain fields to maintain correct syntax. During programming, each field in the memory table has an explanatory text as a guide. Pay attention to filling in the fields correctly, and avoid using accented characters or special characters! Phone numbers in the software should always be entered in international format. The edited data can be saved to a file for verification or modification. Data can be downloaded to and uploaded from the module. The success of data download and upload is indicated by pop-up windows in the software. Unsuccessful download or upload, or connection errors between the computer and the GSM device, are also displayed in pop-up windows.

Various formatted SMS commands can be sent to the MobilPhase-Nano-C module, which will then be executed. These commands allow the module to be queried, controlled, and even reprogrammed remotely. Some of the possible SMS commands include:

– Query SMS command: : #?*

Reply SMS: MobilPhase-Nano Ver:1.22 T-MobileH Rssi:4 A:1, 00:10:00 Áramszunet:0 Szirena:0